Step 5:  Slip the end of the Feed Through Grate on to the screw.

Repeat on the other end panel.

Step 7:  Tighten all the Hex Nuts & Bolts on the front and back panels

Step 8:  Hook a Spring through the Green Perforated Plate that is showing, in the inside of the end panel, and pull up.

Step 9:   Push the Spring up into the top of the end panel and pull it through the slots.  As you pull the Spring, twist it over the slot.

Repeat on all Corners

Step 10:           Your Grazer is now complete.