Installing The Grazer

Wooden Wall Mount:  Set the Grazer against the wall you intend to mount it on.  Place the mounting bracket each side of the unit, (lower than the feed through grate) and mark the position for the lag screw holes.  Drill the holes.  Put brackets in place and screw lag screws, (not provided) into the wall.  Drop the Grazer down into place.  Install Thumb screws into tapped holes of brackets. Tighten thumbscrews to secure feeder. 

Pipe Corral Mount:  Install one bracket on horizontal pipe rail approximately 12 inches from ground level and install the round pipe bracket around the pipe corral on the out side of the corral. Attach with bolts, nuts and washers.

Position feeder and install opposing bracket.  Feeder should be able to slide easily between brackets.

Install Thumb screws into tapped holes of brackets. Tighten thumbscrews to secure feeder. 

Metal Barn Mount:   Follow instructions for wooden wall mounting, except drill holes through wall and mount with carriage bolts and cap nuts. (Not provided.)